HP Mini 5102 Manuel d'utilisateur télécharger pdf (Page 82)

3. On models with the WWAN option installed remove the Phillips PM2.0×2.0 screw (3) that secures

the WWAN bracket to the base enclosure, and then remove the WWAN bracket (4).

4. Grasp the system board at the midpoint of the board (1), and tilt it up to the left (2).

5. Remove the audio connector cover and pull the system board (3) out to the right at an angle to

remove the system board from the base enclosure.

Reverse the procedure to install the system board.

74 Chapter 4 Removal and replacement procedures

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 146 147

Pas de commentaire

HP Mini 5102 Manuel d'utilisateur Page 82