HP OMNIBOOK 2100 Manuel d'utilisateur télécharger pdf (Page 33)

2-10 Removal and Replacement HP OmniBook 2100/3000/3100

5. Pry out and pop up the right end of the icon window cover at the plug-in module slot, then pop off

the cover.

Figure 2-7. Removing the Hinge Covers and Icon Window Cover

6. Remove the icon PCA by doing the following:

• Unplug the IR/icon cable near the right end of the icon PCA.

• Remove the screw from the left end and lift up the PCA.

• Unplug the cable from the motherboard.

7. For the LCD cable emerging from the left hinge, remove the screw from the grounding lug inside

the base assembly. For a 12-inch display, also remove the second screw holding the LCD cable.

Then unplug the cable from the base assembly.

8. For the inverter/MB cable emerging from the right hinge, unplug the cable from the motherboard.

9. Remove the four screws from the hinges, and lift off the display assembly.

Icon Window Cover

Hinge Cover (2)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 106 107

Pas de commentaire

HP OMNIBOOK 2100 Manuel d'utilisateur Page 33