HP OMNIBOOK 2100 Manuel d'utilisateur télécharger pdf (Page 44)

HP OmniBook 2100/3000/3100 Removal and Replacement 2-21

Figure 2-16. Removing the Keyboard

Reassembly Notes

Important

After inserting the keyboard into the case, make sure the back edge of the keyboard is

underneath the four plastic tabs on the case–you should see a small gap between the front of the

keyboard backplate and the top case.

Hint: Insert a Phillips screwdriver into one keyboard screw hole and push it back, then do the

same at the other hole.

Removing the Top Case

(HP Authorized Service Providers Only)

Required Equipment

• Small Phillips screwdriver, preferably magnetized.

Removal Procedure

1. Unplug the ac adapter, if present, and remove the battery.

Screw, M2.5×4mm

Keyboard flex cable

(part of the keyboard)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 106 107

Pas de commentaire

HP OMNIBOOK 2100 Manuel d'utilisateur Page 44