HP V8.5 Manuel d'utilisateur télécharger pdf (Page 50)

THEORY OF OPERATION

5 - 6 V8.5e Rev 2.2.2002

Data rates

The plotter accommodates a wide range of data rates. The speed of

the plotter can be set to 1.0, 2.0, 3.0, 4.0 inches per second. To

achieve a consistent plot rate at a certain speed setting requires

minimum data rates. If data rates are inconsistent, and lower than

these minimum rates, that plot speed will not be sustained. Table

5-4 shows the minimum data rates at the four speed settings.

tolpfodeepS etaratadmuminiM

dnocesrephcni0.1ces/BK44

dnocesrepsehcni0.2ces/BK88

dnocesrepsehcni0.3ces/BK231

dnocesrepsehcni0.4ces/BK671

Table 5-4. Minimum data rates

As with all thermal plotters, slower speeds produce the highest

quality output. Plotting at a speed too high for the data may result

in the deterioration of fine details. Stops and starts caused by

inconsistent data rates may also result in a lower quality output.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Pas de commentaire

HP V8.5 Manuel d'utilisateur Page 50