HP V8.5 Manuel d'utilisateur télécharger pdf (Page 64)

TROUBLESHOOTING

7-4 V8.5e Rev 2.2.2002

Plot is blotchy or faded

Figure 7-4 . Blotchy or faded plot

This problem originates from inconsistent printhead pressure across

the platen roller during plotting.

Possible causes: Lid is not securely closed

Latch pins need adjustment

Solutions:

1. Check that the media is installed correctly and the plotter lid is

securely closed. The top of the lid should be flush with the top of

the side panels.

2. If the plot is fading on one side, test by pressing down on that

side of the lid while the plotter is plotting. If this helps, the latch pin

needs to be adjusted on that side. Contact your authorized service

center.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 79 80

Pas de commentaire

HP V8.5 Manuel d'utilisateur Page 64