HP 510x Guide de l'utilisateur télécharger pdf (Page 33)

ENWW TCP/IP Configuration 33

● From a UNIX command prompt:

arp -s <IP address> <LAN hardware address>

ping <IP address>

where <IP address> is the desired IP address to be assigned to the

print server. The arp command writes the entries to the arp cache

on the workstation, and the ping command configures the IP

address on the print server.

For example:

● In Windows

arp -s 192.168.10.1 00-b0-60-a2-31-98

ping 192.168.10.1

● In UNIX

arp-s 192.168.10.1 00:b0:60:a2:31:98

ping 192.168.10.1

Note Once the IP address has been set on the print server,

additional arp and ping commands will be ignored.

Once the IP address is configured, arp and ping

cannot be used unless the print server is reset to

factory values.

On UNIX systems, the arp -s command may vary

between different systems.

Some BSD-based systems expect the IP address (or

host name) in reverse order. Other systems may

require additional parameters. See your system

documentation for specific command formats.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 101 102

Pas de commentaire

HP 510x Guide de l'utilisateur Page 33