HP X Unified Security Platform Series Manuel d'utilisateur télécharger pdf (Page 154)

Chapter 6 Network

138 X Family LSM User’s Guide V 2.5.1

Create or Edit a Security Zone

STEP 1

From the LSM menu, select Network > Security Zones.

STEP 2

On the Create Network Security Zone page, click Create Security Zone or click the Edit icon

for the zone you want to modify.

STEP 3

On the Create/Edit Security Zone page, configure the zone as required.

For more information, refer to “Configure a Security Zone” on page 139.

Bandwidth Management (rate limiting)

Enable bandwidth rate

limiting

Select this option to specify bandwidth rate limiting for the access

speed for outbound (upload) traffic and inbound (download) traffic

across the device. Applying bandwidth limitation physically limits the

rate of traffic flow. You can define separate limits for outbound and

inbound traffic in kbps.

Note Bandwidth Management is typically used to

prevent packet queuing on a WAN device to provide lower

end-to-end latency on latency sensitive traffic such as

voice over IP.

Network Protection

If you configure Network Protection options, verify that all IP hosts that use the zone are within the

IP addresses specified. Hosts may include:

• directly attached hosts connected to the zone via the Ethernet ports associated with the zone

• remote IP subnets connected via routers in the zone

• IP Address pools specified for any PPTP or L2TP server where the VPNs terminate in the security

zone.

This option is commonly used for transparent deployments to ensure that an IP address can appear

in only one security zone.

IP Address Restrictions The IP addresses for this security zone, either an IP Address Group,

IP subnet or IP range.

Note If you do not specify any restriction, the device will

automatically learn the IP addresses of clients in each

Security Zone.

Prevent Security Zone

sending to VPN tunnels

Determines whether traffic is allowed from this security zone to an

IPSec VPN tunnel.

Table 6–2: Security Zone Configuration Parameters (Continued)

Parameter Description

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 332 333

Commentaires sur ces manuels

Pas de commentaire

HP X Unified Security Platform Series Manuel d'utilisateur Page 154

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP X Unified Security Platform Series