HP X Unified Security Platform Series Guide de l'utilisateur télécharger pdf (Page 61)

configure

X Family CLI Reference V 2.5.1 53

zone < add | remove > zone-name

adds a security zone to (or removes it from) this virtual interface.

gre id

Configures a GRE interface.

igmp [enable | disable] [ query-interval secs] [query-timeout secs]

[max-query-time secs]

Enables and configures IGMP.

local-ip ip-local

Configures the IP Address of the tunnel. Choose an unused IP address that is

routable through your network

peer-ip ip

configures the IP address of the tunnel on the remote device.

pim-dm < enable | disable >

enables PIM-DM.

remote-endpoint-ip remote-ip-address

configures the IP address of the remote device (the tunnel endpoint) when GRE

is not secured by IPSec SA.

rip < enable | disable >

enables or disables RIP on this interface.

rip advertise-routes < enable | disable >

enables or disables the advertisement of RIP routes on this interface.

rip auth < disable | simple key | md5 key >

configures RIP v2 authentication type.

rip poison-reverse < enable | disable >

enables poison reverse.

rip receive-mode < disable | v1 | v2 | all >

configures the RIP receive-mode.

rip send-mode < disable | v1 | v2-broadcast | v2-multicast >

configures the RIP send-mode.

rip split-horizon < enable | disable >

enables split horizon.

sa sa_name

configures the IPSec Security Association that the GRE interface will use.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 141 142

Pas de commentaire

HP X Unified Security Platform Series Guide de l'utilisateur Page 61