HP X Unified Security Platform Series Guide de l'utilisateur télécharger pdf (Page 86)

Chapter 3. Command Reference

78 X Family CLI Reference V 2.5.1

disable

disables the PPTP server.

dns < relay | server-ip-1 [server-ip-2] >

configures DNS servers. Use relay if you want the device to act as a proxy-DNS server (DNS

relay), passing DNS queries to its configured DNS servers, or specify up to two DNS server IP

addresses.

enable

enables the PPTP server.

encryption < disable | enable >

enables Microsoft Point-to-Point Encryption.

logout username [ip]

logs out the named user or the named IP address.

wins server-ip-1 [server-ip-2]

specifies the IP addresses of the primary and secondary WINS servers (if you are using

Microsoft Networking).

zone zone-name

specifies the remote security zone on which to terminate the VPN.

Using conf t vpn pptp

configure

address to be

assigned by

RADIUS

Use configure terminal vpn pptp addresses to configure the VPN connection to assign addresses to

clients from a RADIUS server.

hostname# conf t vpn pptp addresses radius

configure DNS

servers for

PPTP clients

Use configure terminal vpn pptp dns to configure DNS servers for PPTP clients. In this example,

DNS servers at 192.168.1.2 and 192.168.1.3 are configured:

hostname# conf t vpn pptp dns 192.168.1.2 192.168.1.3

conf t web-filtering

The configure terminal web-filtering command is the parent command for all web content-filtering

related options. The command must be used with a subcommand.

default-rule < permit | block >

configures the device response to a request for a web site that is not a member of a currently

filtered category or covered by a Manual Filtering rule. The default rule can be set to permit,

which serves the request and allows access, or to block, which blocks the request and blocks

access. This rule is also applied when the Content Filter Service is not licensed, or the CPA

(Content Portal Authority) server cannot be contacted by the device.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 141 142

Pas de commentaire

HP X Unified Security Platform Series Guide de l'utilisateur Page 86