Hp 3300mfp Manuel d'utilisateur télécharger pdf (Page 140)

138 10 Media EN

Product media specifications

HP LaserJet printers produce excellent print quality. The printer accepts a variety of media, such

as cut-sheet paper (including recycled paper), envelopes, labels, transparencies, vellum, and

custom-sized paper. Properties such as weight, grain, and moisture content are important factors

affecting printer performance and output quality.

The printer can use a variety of paper and other print media in accordance with the guidelines in

this user guide. Media that does not meet these guidelines might cause the following problems:

● Poor print quality

● Increased media jams

● Premature wear on the printer, requiring repair

For best results, use only HP brand paper and print media. Hewlett-Packard Company cannot

recommend the use of other brands. Because they are not HP products, HP cannot influence or

control their quality.

It is possible for media to meet all of the guidelines in this user guide and still not produce

satisfactory results. This might be the result of improper handling, unacceptable temperature and

humidity levels, or other variables over which Hewlett-Packard has no control.

Before you purchase a large quantity of media, make sure that it meets the requirements specified

in this user guide and in Guidelines for Paper and Other Print Media. (See Ordering HP parts and

accessories for more information about ordering the guidelines.) Always test media before you

purchase a large quantity.

CAUTION Using media that does not meet Hewlett-Packard’s specifications might cause problems for the

printer, requiring repair. This repair is not covered by the Hewlett-Packard warranty or service

agreements.

Supported media sizes (printer)

The following are the supported media sizes:

● Minimum: 76 x 127 mm (3 x 5 inches)

● Maximum: 216 x 356 mm (8.5 x 14 inches)

Guidelines for using media

Paper

For best results, use conventional paper. Make sure that the paper is of good quality and free of

cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.

If you are unsure about what type of paper you are loading (such as bond or recycled), check the

label on the package of paper.

Some paper causes print quality problems, jamming, or damage to the printer.

Note Do not use letterhead that is printed with low-temperature inks, such as those used in some types

of thermography.

Note Do not use raised letterhead.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 258 259

Pas de commentaire

Hp 3300mfp Manuel d'utilisateur Page 140