HP ProLiant Smart Array E200 Guide de l'utilisateur télécharger pdf (Page 21)

Operations 21

Lift the assembly to unseat the PCI riser boards and remove the assembly.

Install the PCI riser board assembly

CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all

AC power cords before removing or installing the PCI riser board assembly.

1. Align the PCI riser boards with the corresponding connectors on the system board and install the

assembly.

2. Tighten the four PCI riser board assembly thumbscrews.

Remove the power supply air baffle

1. Power down the server (on page 18).

2. Extend or remove the server from the rack ("Extend the server from the rack" on page 19).

3. Remove the access panel (on page 20).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 117 118

Pas de commentaire

HP ProLiant Smart Array E200 Guide de l'utilisateur Page 21