HP 2000s Guide de l'utilisateur télécharger pdf (Page 41)

Basic Administrative Procedures and Setup Completion

41NAS 2000s Administration Guide

Checking the Status of the Team

To check the status of the Ethernet Team, open the HP Network Teaming utility. The

Configuration Properties screen is displayed, showing the teamed NICs.

Figure 18: NIC Teaming status

NIC Teaming Troubleshooting

Problems with the NIC teaming feature are diagnosed by the connection icons displayed in the

HP Network Teaming and Configuration dialog box. The following table lists the error

icons for RJ 45 NICs.

Table 2: NIC Teaming Troubleshooting

RJ-45 Description

Active OK—The NIC is operating properly. The driver is installed in the registry

and is loaded. If the NIC is a member of a team, the NIC is active.

Installed inactive—The NIC is installed and is OK, but is not active.

Cable fault—The driver is installed in the registry and is loaded. The broken

cable indicator means that the cable is unplugged, loose, broken, or the switch

or hub is not operating properly. If this icon is displayed, check all network

connections and make sure the hub/switch is working properly. When the

connection is restored, this icon will change.

Inactive cable fault—A cable fault has occurred while the NIC was inactive.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 199 200

Pas de commentaire

HP 2000s Guide de l'utilisateur Page 41