Hp Smart Update Manager (User Guide) Manuel d'utilisateur télécharger pdf (Page 35)

Prerequisites for using Linux root credentials

• If you have run HP SUM as a root user, remove the temp directory created by HP SUM.

• Make sure you have read/write access permissions to the /tmp and /var directories.

• If you create a sudo user, make sure that you add that user to the /ect/sudousers file. The

following table shows the privileges and specifications for users.

SpecificationPrivilegeUser

ALLALL= (ALL)Root

ALLALL= (ALL)Sudo_user

Switch update commands

G7 and earlier servers do not support AMS agents. The following tables show what updates occur

when you use the switch agent commands.

NOTE: To find out if you have any switches installed, use HP SUM to create the Target Firmware

Details Report.

The following table shows what updates occur if no switches are currently installed.

Gen8 serversG7 and earlier serversCommand

AMSSNMPno switches

NothingNothing/no_mgmt

AMSNothing/use_ams

SNMPSNMP/use_snmp

WBEMWBEM/use_wmi

AMS and SNMPSNMP/use_ams /use_snmp

AMS and WBEMWBEM/use_ams /use_wmi

WBEM and SNMPWBEM and SNMP/use_wmi /use_snmp

AMS, SNMP, and WBEMWBEM and SNMP/use_ams /use_wmi /use_snmp

The following table shows what updates occur if SNMP switches are currently installed.

Gen8 serversG7 and earlier serversCommand

SNMPSNMPno switches

SNMP and AMSSNMP/use_ams

SNMPSNMP/use_snmp

WBEM and SNMPWBEM and SNMP/use_wmi

AMS and SNMPSNMP/use_ams /use_snmp

AMS, SNMP, and WBEMWBEM and SNMP/use_ams /use_wmi

WBEM and SNMPWBEM and SNMP/use_wmi /use_snmp

AMS, SNMP, and WBEMWBEM and SNMP/use_ams /use_wmi /use_snmp

Command-line interface 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 84 85

Pas de commentaire

Hp Smart Update Manager (User Guide) Manuel d'utilisateur Page 35