HP X9300 Guide d'installation télécharger pdf (Page 118)

To configure the Interconnect (IC) IP addresses in sequence, enter the first Interconnect (IC) IP

address on the Set Interconnect IP Addresses dialog box. The installer then sets the remainder

of the addresses sequentially for all 8 interconnect bays. For example, if 172.16.3.21 is the

starting Interconnect (IC) IP Address, the installer sets the Interconnect (IC) IP Addresses in the

range 172.16.3.21–172.16.3.28.

To configure the Interconnect IP addresses manually, enter each address on the Set Interconnect

IP Addresses dialog box.

14. The wizard lists the IP addresses you specified on the Confirm IC IP Addresses dialog box.

Select Ok to continue.

118 Expanding an X9720 or X9320 10GbE cluster by an X9730 module

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 150 151

Pas de commentaire

HP X9300 Guide d'installation Page 118