Hp StorageWorks 3000 RAID Array Manuel d'utilisateur télécharger pdf (Page 52)

3-6 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:

Part Number: AA-RBF2C-TE File Name: d-ch3 Using Command Console.doc Last Saved On: 12/5/00 10:20 AM

Establishing a Serial Connection, Single Controller

The simplest connection to a storage subsystem is a direct cable connection

from the client’s host system to one of the storage subsystem’s serial ports. To

establish a serial connection, connect a serial cable from one of the computer’s

COM ports to the storage subsystem's CTR TOP (controller in top slot) or

CTR BOTTOM (controller in second slot) configuration port and proceed as

follows:

1. Select HSZ22 Storage window.

2. When the Connection Choice dialog box displays, select the Serial

option, then click OK to display the HSZ22 Management: Serial

Connection dialog box (Figure 3– 4).

3. The drop-down menu, select the computer COM port that your RA3000

is connected to, then click the Connect button to display the Storage

window. When the Storage window displays, you are connected to your

storage subsystem.

Figure 3-4. HSZ22 Management Serial Connection dialog box for

Storage window

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 125 126

Pas de commentaire

Hp StorageWorks 3000 RAID Array Manuel d'utilisateur Page 52