Hp XP Continuous Access Software Manuel d'utilisateur télécharger pdf (Page 200)

Table 52 Example of RAID Manager XP conﬁguration deﬁnition ﬁle at secondary site

(instance 17)

HORCM_MON

#ip_address service poll(10ms) timeout(10ms)

123.456.80.51 20332 1000 3000

HORCM_CMD

#dev_name dev_name dev_name

#UnitID 0 (Serial# 62490)

/dev/sdf

HORCM_DEV

#dev_group dev_name port# TargetID LU# MU#

# /dev/sdt SER = 62486 LDEV = 10 [ FIBRE FCTBL=3]

VG_TC VG_032 CL1-A-1 0 10

# /dev/sdu SER = 62486 LDEV = 64 [ FIBRE FCTBL=3]

VG_TC VG_033 CL1-A-1 0 11

# /dev/sdv SER = 62486 LDEV = 12 [ FIBRE FCTBL=3]

VG_TC VG_034 CL1-A-1 0 12

# /dev/sdw SER = 62486 LDEV = 66 [ FIBRE FCTBL=3]

VG_TC VG_035 CL1-A-1 0 13

# /dev/sdan SER = 62486 LDEV = 30 [ FIBRE FCTBL=3]

VG_SI VG_014 CL1-A-1 0 30

# /dev/sdao SER = 62486 LDEV = 84 [ FIBRE FCTBL=3]

VG_SI VG_015 CL1-A-1 0 31

# /dev/sdap SER = 62486 LDEV = 41 [ FIBRE FCTBL=3]

VG_SI VG_016 CL1-A-1 0 32

# /dev/sdaq SER = 62486 LDEV = 86 [ FIBRE FCTBL=3]

VG_SI VG_017 CL1-A-1 0 33

HORCM_INST

#dev_group ip_address service

VG_TC 123.456.78.51 20331

VG_TC 123.456.78.115 20331

VG_SI 123.456.80.51 20331

VG_SI 123.456.80.115 20331

SettingtheRAIDXPManageruserenvironmentalvariable

In the following procedure, the environment variables HORCMINST and HORCC_MRCF are corrected

corresponding to a system conﬁguration. This setup is performed on the four nodes (CL1 and CL2 of the

cluster to which the Continuous Access XP Journal P-VOL is connected, and CL1 and CL2 of the cluster

in which the S-VOL is used).

1. At both sites

, set up the environment variable of the RAID Manager XP instance:

sudo horc_se

tenv HORCMINST 16 (for instance number 16)

sudo horc_setenv HORCMINST 17 (for instance number 17)

2. At both sites, set up the HOMRCF command environment variable of the RAID Manager XP as

Continuous

Access XP Journal:

sudo horc_unsetenv HORCC_MRCF

3. If you logged in to the target NAS package using SSH and set up as explained in step 1 and step 2,

conﬁrm the setup by logging out of the NAS package and then logging back in:

exit

200

Continuous Access XP Journal operations with NAS Blade

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 233 234

Commentaires sur ces manuels

Pas de commentaire

Hp XP Continuous Access Software Manuel d'utilisateur Page 200

Commentaires sur ces manuels

Produits connexes et manuels pour Stockage Hp XP Continuous Access Software