HP Chromebox G2 Manuel d'utilisateur télécharger pdf (Page 18)

4 Removal and replacement preliminary

requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:

●

Flat-bladed screw driver

●

Magnetic screw driver

●

Phillips P0 screw driver

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly

and assembly procedures.

NOTE: As you remove each subassembly from the computer, place the subassembly (and all

accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care

when handling the plastic parts. Apply pressure only at the points designated in

the maintenance instructions.

Cables and connectors

CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during

the reassembly process. Improper cable placement can damage the computer.

Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat

the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid

bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught

or snagged by parts being removed or replaced. Handle ex cables with extreme care; these cables

tear easily.

12 Chapter 4 Removal and replacement preliminary requirements

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 50 51

Pas de commentaire

HP Chromebox G2 Manuel d'utilisateur Page 18