HP Chromebox G2 Manuel d'utilisateur télécharger pdf (Page 26)

Rear I/O bracket

Description Spare part number

Rear I/O bracket L17262-001

Before removing the rear I/O bracket, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

4. Remove the bottom cover (see Bottom cover on page 17).

Remove the rear I/O bracket:

1. Lift the Mylar tape from on top of the bracket (1).

2. Remove the two Phillips M2.5×4.0 screws (2) that secure the bracket to the computer.

3. Rotate the top of the bracket o the chassis (3), and then remove the bracket (4).

Reverse this procedure to install the rear I/O bracket.

20 Chapter 5 Removal and replacement procedures

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 50 51

Pas de commentaire

HP Chromebox G2 Manuel d'utilisateur Page 26