Hp ProLiant DL385 G6 Server Manuel d'utilisateur télécharger pdf (Page 68)

Troubleshooting 68

• If a device has latches, be sure they are completely closed and locked.

• Check any interlock or interconnect LEDs that may indicate a component is not connected properly.

• If problems continue to occur, remove and reinstall each device, checking the connectors and sockets

for bent pins or other damage.

Service notifications

To view the latest service notifications, refer to the HP website (http://www.hp.com/go/bizsupport).

Select the appropriate server model, and then click the Troubleshoot a Problem link on the product page.

Troubleshooting flowcharts

To effectively troubleshoot a problem, HP recommends that you start with the first flowchart in this section,

"Start diagnosis flowchart (on page 68)," and follow the appropriate diagnostic path. If the other

flowcharts do not provide a troubleshooting solution, follow the diagnostic steps in "General diagnosis

flowchart (on page 69)." The General diagnosis flowchart is a generic troubleshooting process to be used

when the problem is not server-specific or is not easily categorized into the other flowcharts.

The available flowcharts include:

• Start diagnosis flowchart (on page 68)

• General diagnosis flowchart (on page 69)

• Server power-on problems flowchart (on page 71)

• POST problems flowchart (on page 74)

• OS boot problems flowchart (on page 75)

• Server fault indications flowchart (on page 77)

Start diagnosis flowchart

Use the following flowchart to start the diagnostic process.

Item Refer to

1 "General diagnosis flowchart (on page 69)"

2 "Power-on problems flowchart ("Server power-on problems flowchart" on

page 71)"

3 "POST problems flowchart (on page 74)"

4 "OS boot problems flowchart (on page 75)"

5 "Server fault indications flowchart (on page 77)"

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 105 106

Pas de commentaire

Hp ProLiant DL385 G6 Server Manuel d'utilisateur Page 68