Hp DL120 Manuel d'utilisateur télécharger pdf (Page 67)

Removal and replacement procedures 67

System fans

The server has three system fans located on the chassis’ center wall. The figure below identifies the

system fans by their device number and shows their corresponding cable connections.

Device number System board connector

1 CPU_FAN1

2 CPU_FAN2

3 SYSFAN

NOTE: Fan 1 and 2 are for the processor and DIMMs;

fan 3 is for the expansion boards.

A new system fan can be installed to allow the server to operate properly in case the default system

fan becomes defective.

NOTES:

•

If you are replacing the system fans 1 or 2, remove the air baffle first to be able to unlatch the fan cable

from the chassis. Reinstall the air baffle after installing the new system fan.

• If you are replacing the system fan 3, remove the PCI riser board assembly first to be able to unlatch the

fan cable from the chassis. Reinstall the PCI riser board assembly after installing the new system fan.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 107 108

Pas de commentaire

Hp DL120 Manuel d'utilisateur Page 67