HP Mini 5102 Manuel d'utilisateur télécharger pdf (Page 63)

Top cover

Description Spare part number

Top cover with TouchPad, black 577926-001

Top cover with TouchPad, red 598461-001

Top cover with TouchPad, blue 598462-001

Before removing the top cover, follow these steps:

1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device

on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the device.

3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the device.

4. Remove the battery (see

Battery on page 41).

5. If your device has WWAN capability, remove the SIM (see

SIM on page 42).

6. Remove the memory module (see

Memory module on page 43).

7. Remove the keyboard (see

Keyboard on page 45).

8. Remove the hard drive or solid state drive (see

Mass storage devices on page 48).

9. Remove the WLAN module (see

WLAN module on page 51)

Remove the top cover:

1. Turn the device upside down, with the front toward you.

2. Use a thin, flat tool to release the 4 rubber device feet.

3. Remove the 4 Torx T8 2.5×5.0 screws (1), and the 4 Phillips PM2.0×3.0 screws (2) that secure the

top cover to the base enclosure.

Component replacement procedures 55

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 146 147

Pas de commentaire

HP Mini 5102 Manuel d'utilisateur Page 63