Hp Deskjet F4580 All-in-One Printer Manuel d'utilisateur télécharger pdf (Page 48)

CAUTION: Do not connect the USB cable to the computer until prompted by the

software installation screen.

This section contains the following topics:

•

The product will not turn on

•

After setting up the product, it does not print

•

The registration screen does not appear

•

Uninstall and reinstall the software

The product will not turn on

Try the following solutions to resolve the issue. Solutions are listed in order, with the most

likely solution first. If the first solution does not solve the problem, continue trying the

remaining solutions until the issue is resolved.

•

Solution 1: Make sure the power cord is connected

•

Solution 2: Press the On button more slowly

Solution 1: Make sure the power cord is connected

Solution:

• Make sure the power cord is firmly connected to both the product and the power

adapter. Plug the power cord into a power outlet, surge protector, or power strip.

1 Power connection

2 Power cord and adapter

• If you are using a power strip, make sure the power strip is on. Or, try plugging

the product directly into a power outlet.

• Test the power outlet to make sure it is working. Plug in an appliance that you

know works, and see if the appliance has power. If not, then there might be a

problem with the power outlet.

• If you plugged the product into a switched outlet, make sure the outlet is switched

on. If it is switched to on but still does not work, then there might be a problem

with the power outlet.

Cause: The product was not properly connected to a power supply.

If this did not solve the issue, try the next solution.

Setup troubleshooting 45

Solve a problem

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 76 77

Pas de commentaire

Hp Deskjet F4580 All-in-One Printer Manuel d'utilisateur Page 48