Hp Integrity rx4610 Server Manuel d'utilisateur télécharger pdf (Page 146)

Chapter 11: Troubleshooting

139

(in the example it is 5-8). On replacing the DIMMs, make sure the size and HP part number

match.

2. Clear CMOS via the front panel or via clear CMOS jumper in order to clear previous defective

DIMM history.

3. Power on the system to continue.

Error Logging

The defective row/DIMM(s) found during this test case will be logged to the SEL and reported on the

screen.

Case 4

This is a special case where memory errors encountered in the first row test and base memory test can

lead to an infinite loop of system resets. This special case occurs under the following conditions:

1. First row test encounters an SBE, base memory test encounters memory errors and the jumper

is set to ‘clear CMOS’ position

2. First row test encounters an SBE, base memory test encounters memory errors and a front

panel button combination to clear CMOS has been completed.

3. First row test encounters an SBE, base memory test encounters memory errors and a bad

CMOS checksum was seen by BIOS.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 200 201

Pas de commentaire

Hp Integrity rx4610 Server Manuel d'utilisateur Page 146