Hp ProLiant BL280c G6 Server-Blade Manuel d'utilisateur Page 23
- Page / 108
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Hardware options installation 23
CAUTION: To prevent possible server blade malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
CAUTION: To prevent possible server blade overheating, always populate processor socket 2
with a processor and a heatsink or a processor socket cover and a heatsink blank.
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
IMPORTANT: When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.
IMPORTANT:
Processor socket 1 must always be populated. If processor socket 1 is empty, the
server blade does not power up.
IMPORTANT: When installing a processor with a faster speed or adding an additional
processor, update the system ROM before installing the processor.
To install the component:
1. Update the system ROM.
Locate and download the latest ROM version from the HP website (http://www.hp.com/support).
Follow the instructions on the website to update the system ROM.
2. Power down the server blade (on page 11).
3. Remove the server blade (on page 12).
4. Remove the access panel (on page 13).
5. If installed, disconnect the hard drive power and data cables from the system board ("Hard drive
connector identification" on page 9).
6. Remove the air baffle.
CAUTION: Failure to completely open the processor locking lever prevents the processor from
seating during installation, leading to hardware damage.
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs and buttons 7
- System board components 8
- DIMM slot locations 9
- System maintenance switch 9
- HP c-Class Blade SUV Cable 10
- Operations 11
- Remove the server blade 12
- Remove the access panel 13
- Install the access panel 13
- Remove the air baffle 13
- Install the air baffle 13
- Overview 15
- Connecting to the network 17
- Installing a server blade 18
- Completing the configuration 19
- Introduction 20
- Hard drive option 20
- Processor option 22
- Memory options 27
- DIMM identification 28
- Memory configurations 29
- Installing a DIMM 35
- Mezzanine card option 36
- Cabling 47
- USB devices 48
- USB diskette 50
- Item Description 50
- Network-based PXE deployment 52
- Deployment methods 54
- CD-ROM deployment 55
- Diskette image deployment 56
- Configuration tools 57
- HP ROM-Based Setup Utility 58
- Auto-configuration process 59
- Boot options 59
- BIOS Serial Console 59
- Array Configuration Utility 60
- Management tools 62
- Erase Utility 63
- Redundant ROM support 63
- Diagnostic tools 64
- Integrated Management Log 65
- Keeping the system current 66
- Care Pack 67
- Troubleshooting 68
- Symbols on equipment 69
- Warnings 69
- Symptom information 70
- Troubleshooting 71 71
- Loose connections 72
- Service notifications 72
- Server health LEDs 72
- Troubleshooting flowcharts 72
- Start diagnosis flowchart 73
- General diagnosis flowchart 74
- Symptoms: 76
- POST problems flowchart 78
- OS boot problems flowchart 80
- • Corrupted OS 81
- • Redundancy failure 83
- (http://www.hp.com/support) 84
- Troubleshooting 85 85
- Battery replacement 86
- FCC rating label 87
- Class A equipment 87
- Class B equipment 87
- Modifications 88
- • EMC Directive 2004/108/EC 89
- Japanese notice 90
- BSMI notice 90
- Korean notice 90
- Chinese notice 91
- Laser compliance 91
- Battery replacement notice 91
- Electrostatic discharge 93
- Specifications 94
- Technical support 95
- Technical support 96 96
- Customer Self Repair 97
- Technical support 98 98
- Reparo feito pelo cliente 99
- Technical support 100 100
- Technical support 101 101
- Technical support 102 102
- Acronyms and abbreviations 103
- Index 105 105
- Index 106 106
- Index 107 107
- Index 108 108
Produits connexes et manuels pour Matériel informatique Hp ProLiant BL280c G6 Server-Blade
(125 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.074 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels