Hp ProLiant BL280c G6 Server-Blade Manuel d'utilisateur télécharger pdf (Page 56)

Software and configuration utilities 56

To deploy with a boot CD:

1. Use the HP c-Class Blade SUV Cable to connect a USB CD-ROM drive to the server blade. Refer to

"Connecting locally to a server blade with video and USB devices (on page 48)."

2. Insert the boot CD into the USB CD-ROM drive.

3. Reboot the server blade.

4. After the server blade boots, follow the normal installation procedure for an OS.

Windows Server® 2003 cannot be installed from a USB CD-ROM on the HP c-Class Blade SUV Cable if the

hard drive is completely blank (no partitions defined). To install Windows Server® 2003, use one of the

following methods:

• Make a partition on the hard drive that Windows Server® 2003 will be loaded on.

• Use the SmartStart CD 7.60 or later.

• Use the Rapid Deployment Pack. For instructions, see the HP website

(http://h18013.www1.hp.com/products/servers/management/rdp.html?jumpid=reg_R1002_USE

N).

Diskette image deployment

To deploy with a diskette image, the user creates a DOS-based network-enabled boot diskette that executes

a script that configures the hardware and installs the OS. The diskette enables the server blade to access the

required deployment scripts and files on the network.

This method implies a deployment infrastructure that may include an administrator workstation, PXE server,

Microsoft® Windows® file share, or a Linux file share. For more information, refer to "Deployment

infrastructure (on page 52)."

Before beginning the deployment process, connect the server blade to the network.

NOTE: For more information about hardware and cabling configurations, see the documents

that ship with the enclosure.

Two methods are available for diskette image deployment:

• iLO virtual floppy (on page 57)

• PXE ("PXE deployment" on page 54)

Creating a boot diskette

The SmartStart Scripting Toolkit provides the tools and information for creating a boot diskette. For details,

refer to the SmartStart Scripting Toolkit User Guide and download the latest version of the software from the

HP website (http://www.hp.com/servers/sstoolkit).

As an alternative method, configure the hardware manually with RBSU and the iLO 2 remote console. With

this method, the disk is more generic and integrates with an existing network OS installation process. For

more information, refer to "HP BladeSystem c-Class advanced management (on page 51)."

To operate properly, the server blade must have a supported OS. For the latest information on a supported

OS, refer to the HP website (http://www.hp.com/go/supportos).

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 107 108

Pas de commentaire

Hp ProLiant BL280c G6 Server-Blade Manuel d'utilisateur Page 56