HP 7500A Guide de l'utilisateur télécharger pdf (Page 101)

Solution 2: Make sure the paper is loaded correctly

Solution: Make sure that the paper is loaded correctly in the input tray.

For more information, see:

Load media

Cause: The paper was not loaded correctly.

If this did not solve the issue, try the next solution.

Solution 3: Check the print settings

Solution: Check the print settings.

• Check the paper type setting to make sure it matches the type of paper loaded in

the input tray.

• Check the print quality setting and make sure it is not set too low.

Print the image with a high print quality setting, such as Best or Maximum dpi.

Cause: The paper type or print quality settings were set incorrectly.

If this did not solve the issue, try the next solution.

Solution 4: Clean the rollers

Solution: Clean the rollers.

Make sure you have the following materials available:

• A lint-free cloth, or any soft material that will not come apart or leave fibers.

• Distilled, filtered, or bottled water (tap water might contain contaminants that can

damage the ink cartridges).

Cause: The rollers were dirty and needed to be cleaned.

Print troubleshooting 97

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 251 252

Pas de commentaire

HP 7500A Guide de l'utilisateur Page 101