HP 7500A Guide de l'utilisateur télécharger pdf (Page 217)

To set up the printer on the same phone line as a computer with two phone ports

Back view of the printer

1 Telephone wall jack

2 Use the phone cord supplied in the box with the printer to connect to the 1-

LINE port.

You might need to connect the supplied phone cord to the adapter provided

for your country/region.

3 Computer with modem

4 Telephone

1. Remove the white plug from the port labeled 2-EXT on the back of the printer.

2. Find the phone cord that connects from the back of your computer (your computer dial-up

modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it

into the port labeled 2-EXT on the back of the printer.

3. Connect a phone to the "OUT" port on the back of your computer dial-up modem.

4. Using the phone cord supplied in the box with the printer, connect one end to your telephone

wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer.

NOTE: You might need to connect the supplied phone cord to the adapter provided for

your country/region.

If you do not use the supplied cord to connect from the telephone wall jack to the printer,

you might not be able to fax successfully. This special phone cord is different from the phone

cords you might already have in your home or office.

5. If your modem software is set to receive faxes to your computer automatically, turn off that

setting.

NOTE: If you do not turn off the automatic fax reception setting in your modem software,

the printer cannot receive faxes.

Set up faxing (parallel phone systems) 213

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 251 252

Pas de commentaire

HP 7500A Guide de l'utilisateur Page 217