HP 100BaseT Guide de l'utilisateur télécharger pdf (Page 34)

HP 100Base-T Hubs Installation and Reference Guide

2-2 Installing the System

Hardware Installation

This hub is suitable for desktop or rack-mount installation. A

good location is at the center of all the devices you want to link,

close to the extended network, and near a power outlet.

These hubs can be stacked with other hubs using a mounting rack or

directly on top of one another. Refer to the sections on

Stacking

Hubs without a Rack

Mounting Hubs in a Rack

for a description of

these methods.

If you don’t want to stack the hub with other hubs now, or if you plan

to use the hub in a standalone configuration, skip this step and

proceed to

Connecting the Hub System

Stacking Hubs without a Rack

The hub can be stacked anywhere there is a sufficiently large

flat space, such as on a table or desktop.

1. Stick the self-adhesive rubber foot pads (that come with this

package) on each of the 4 hollow spaces located on the

bottom of the first hub.

2. Place the first hub on a firm and flat surface in the area

where you want the stack to be installed.

3. Attach the rubber feet on each hub before stacking them.

They cushion the hub against shock/vibrations and provide

space between each hub for ventilation.

You do not need the rack

mount kit if you are not

mounting the hub in a rack.

Keep the mounting brackets and

screws, however, for possible

future use.

Figure 2.1 Stacking Hubs without a Rack

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 156 157

Pas de commentaire

HP 100BaseT Guide de l'utilisateur Page 34