HP 10BASE-T Guide de l'utilisateur télécharger pdf (Page 13)

If you are stacking hubs and the RPS in a single rack and want them to fit

tightly, the selection of the first screw holes is important. In a standard

19-inch telco rack, the screw hole pattern has repetitive pairs of holes

separated by 0.5-inch or 0.625-inch. Insert these first screws in the upper

hole of a close (0.5-inch) pair, as shown in the illustration.

Insert a screw into the

top hole of a close (0.5-

inch) pair—like one of

these—one in each of

the rack uprights.

One upright of an EIA

19-inch telco rack

Installation Summary

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Pas de commentaire

HP 10BASE-T Guide de l'utilisateur Page 13