HP NetServer LP 2000r Guide de l'utilisateur télécharger pdf (Page 39)

Chapter 4 Installing Additional Memory

9. Align the notches on the DIMM with the keys on the slot. See Figure 4-3.

Retaining Latches (2)

DIMM Slot

Keys

Notches

Figure 4-3. Aligning the DIMM

10. Hold the DIMM at approximately 30 ° to the system board and press the

DIMM firmly and evenly into the slot until the retaining latches close.

See Figures 4-3 and 4-4.

It is important to hold the DIMM firmly with both hands and use even

pressure so as not to bend or break the DIMM connector during

installation. If the latches do not close, the DIMM is not inserted correctly.

11. Repeat Steps 7-10 to install additional DIMMs for your memory

configuration.

DIMM

Slots

System Board

Figure 4-4. Inserting DIMMs

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 135 136

Pas de commentaire

HP NetServer LP 2000r Guide de l'utilisateur Page 39