HP NetServer LXr 8500 Guide de l'utilisateur télécharger pdf (Page 37)

Chapter 2 PCI Hot Plug Utility for Novell NetWare

PCI Hot Plug

LED Indicators

(Amber)

Power

ttention

P10 P9

P8 P7

P6 P5 P4 P3 P2 P1

Figure 24. Hot Plug Slots and LEDs

Table 7 decodes the LEDs for each PCI slot:

Table 7. PCI (Hot Plug) LED Codes (rear panel view)

Amber

LED

Green

LED

Slot

Status

Indicates This Status

Off On Ready Powered on, but no driver loaded for board. Do not

remove the board from the slot.

Powered On The PCI slot just power on, but the driver initiation is

not complete yet. This only happens momentarily prior

to completing driver loading. Do not remove the board

from the slot.

Active Power to the slot is on, and the slot is operating

normally. Do not remove the board from the slot.

On Off Powered

Off (wrong

board or no

board)

Power to the slot is off, but the Amber LED is on, due

to a failure in the Hot Replacement process. Typically

this is the result of installing the wrong board, because

the replacement board must be the same type as the

original PCI board. This also occurs if the board is

removed, emptying the slot, and power is turned on.

You can safely remove the board from this slot.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 46 47

Pas de commentaire

HP NetServer LXr 8500 Guide de l'utilisateur Page 37