HP ProLiant Generation ML310 Spécifications télécharger pdf (Page 45)

Removal and replacement procedures 45

3. Align and install the heatsink with the arrow on the heatsink label pointing to the front of the server.

4. Connect the processor heatsink fan cable to the system board ("System board components" on page

68). When the heatsink is oriented properly, cable length is sufficient for the corresponding

connector.

5. Install the access panel.

6. Lock the bezel.

Processor

CAUTION: Removal of the processor or heatsink renders the thermal layer between the

processor and heatsink useless. Clean the component with the provided alcohol swab, then

add thermal grease.

IMPORTANT: If upgrading processor speed, update the system ROM before installing the

processor.

NOTE: PPM 1 is embedded in the system board.

To remove the component:

1. Power down the server (on page 26).

2. Unlock the bezel (on page 27).

3. Remove the access panel ("Access panel" on page 28).

4. Remove the heatsink ("Heatsink" on page 43).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 79 80

Pas de commentaire

HP ProLiant Generation ML310 Spécifications Page 45