HP Server rp8400 Guide d'installation télécharger pdf (Page 41)

Chapter 3

Unpacking

Wheel Kit Installation

7. Remove two of the eight screws from the plastic pouch. Attach one wheel caster to the front of the server.

Figure 3-9 Attaching a Caster Wheel to the Server

8. Attach the remaining front caster to the server using two more screws supplied in the plastic pouch.

9. Remove the rear cushion at the rear of the server. Do not remove the remaining cushions.

10. Mount the two rear casters to the server using the remaining four screws.

11. Obtain the plywood ramp from the wheel kit.

Front Caster

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 93 94

Pas de commentaire

HP Server rp8400 Guide d'installation Page 41