HP Server rp8400 Guide d'installation télécharger pdf (Page 68)

Chapter 5

System Installation

Turning On Housekeeping Power and Logging in to the MP

• after 30 seconds has elapsed. Note the flashing amber BPS LED for each BPS becomes a flashing

green LED

Figure 5-5 BPS LED Location

3. Login to the MP:

a. Enter Admin at the login prompt. (This term is case sensitive.)

It takes a few moments for the MP prompt to appear. If it does not, make sure the laptop serial device

settings are correct: 8 bits, no parity, 9600 baud, and None for both Receive and Transmit. Then, try

again.

b. Enter Admin at the password prompt. (This term is case sensitive.)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 93 94

Pas de commentaire

HP Server rp8400 Guide d'installation Page 68