Hp Hitachi Dynamic Link Manager Software Manuel d'utilisateur Page 205

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 652
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 204
3. Creating an HDLM Environment
183
# newfs /dev/md/rdsk/d10
# newfs /dev/md/rdsk/d30
5. Mount the Solaris basic file system of the post-migration environment.
For example:
# mount /dev/md/dsk/d10 /mnt0
# mount /dev/md/dsk/d30 /mnt1
6. Copy the existing Solaris basic file system to the post-migration environment.
For example:
# ufsdump 0f - / | (cd /mnt0; ufsrestore rf -)
# ufsdump 0f - /usr | (cd /mnt1; ufsrestore rf -)
7. Edit the file /etc/vfstab (/mnt0/etc/vfstab) of the boot disk after the
migration to change the definition of the
swap after the migration to a metadevice
(
/dev/md/dsk/d20) and change the definition of /usr after the migration to a
metadevice (
/dev/md/ds/d30).
Before change:
/dev/md/dsk/d200 - swap - no -
/dev/md/dsk/d300 /dev/md/rdsk/d30 /usr ufs 1 no -
After change:
/dev/md/dsk/d20 - swap - no -
/dev/md/dsk/d30 /dev/md/rdsk/d300 /usr ufs 1 no -
8. Edit the file /etc/dumpadm.conf (/mnt0/etc/dumpadm.conf) of the boot
disk after the migration to change the definition of the dump device specified for
the parameter
DUMPADM_DEVICE to the boot disk of the post-migration
environment.
Before change:
DUMPADM_DEVICE=/dev/md/dsk/d200
After change:
DUMPADM_DEVICE=/dev/md/dsk/d20
Vue de la page 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 651 652

Commentaires sur ces manuels

Pas de commentaire