Hp Hitachi Dynamic Link Manager Software Manuel d'utilisateur Page 238

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 652
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 237
3. Creating an HDLM Environment
216
The settings files necessary for device suppression are created by selecting menu
task
17 (Prevent multipathing/Suppress devices from VxVM's
view
) or 18 (Allow multipathing/Unsuppress devices from VxVM's
view
) from the vxdiskadm main menu, and then by selecting menu task 8 (List
currently suppressed/non-multipathed devices
) from the
VolumeManager/Disk/ExcludeDevices or VolumeManager/Disk/
IncludeDevices
menu.
(2) Removing Devices from VxVM on a Controller Basis
If physical paths connected to one LU go through different HBAs, devices are removed
from VxVM on a controller or path basis. The procedure for removing devices from
VxVM on a controller basis is described below by using the configuration example
shown in Figure 3-23: When HBA ports on the alternate path differ from those on the
primary path connected to the Hitachi storage system. This figure shows a
configuration that is recognized by VxVM before devices are removed.
Vue de la page 237
1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 651 652

Commentaires sur ces manuels

Pas de commentaire