HP EliteDesk 800 G3 Small Form Factor PC (ENERGY STAR) Manuel d'utilisateur télécharger pdf (Page 38)

Removing a 2.5-inch hard drive

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB ash drives, from the computer.

3. Turn o the computer properly through the operating system, and turn o any external devices.

4. Disconnect the power cord from the AC outlet and disconnect any external devices.

IMPORTANT: Regardless of the power-on state, voltage is always present on the system board as long

as the system is plugged into an active AC outlet. To prevent damage to internal components, you must

disconnect the power cord from the power source before opening the computer.

5. If the computer is on a stand, remove the computer from the stand.

6. Remove the computer access panel.

7. Remove the front bezel.

8. Rotate the drive cage to its upright position.

32 Chapter 2 Hardware upgrades

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 58 59

Pas de commentaire

HP EliteDesk 800 G3 Small Form Factor PC (ENERGY STAR) Manuel d'utilisateur Page 38