HP ZBook 15 G3 Base Model Mobile Workstation Manuel d'utilisateur télécharger pdf (Page 78)

Graphics board

NOTE: The graphics board spare part kit includes replacement thermal material.

Description Spare part number

NVIDIA Quadro M1000M graphics board 848261-001

NVIDIA Quadro M2000M graphics board 848262-001

NVIDIA Quadro M600M graphics board 910536-001

AMD FirePro W5170M graphics board 848263-001

Before removing the graphics board, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the bottom cover (see Bottom cover on page 32).

5. Disconnect the battery (see Battery on page 34).

6. Remove the heat sink (see Heat sink assembly on page 62).

Remove the graphics board:

1. Remove the two Torx T8M3.0×5.5 screws (1) that secure the graphics board to the system board.

2. Lift the edge of graphics board upward until it sits at an angle (2), and then remove the board from the

socket (3).

Reverse this procedure to install the graphics board.

66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 206 207

Pas de commentaire

HP ZBook 15 G3 Base Model Mobile Workstation Manuel d'utilisateur Page 78