HP 3700 series Manuel d'utilisateur Page 202

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 250
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 201
Print quality troubleshooting
If you are experiencing problems with print quality, the following sections might help identify
the cause of the problem.
Print quality problems associated with paper
Some print quality problems arise from use of inappropriate paper.
Use paper that meets HP paper specifications. See
Supported paper weights and sizes.
The surface of the paper is too smooth. Use paper that meets HP paper specifications.
See
Supported paper weights and sizes.
The driver setting is incorrect. To change the paper type setting, see
Type and Size.
The paper you are using is too heavy for the paper type setting you selected, and the
toner is not fusing to the paper.
The moisture content of the paper is uneven, too high, or too low. Use paper from a
different source or from an unopened ream of paper.
Some areas of the paper reject toner. Use paper from a different source or from an
unopened ream of paper.
The letterhead you are using is printed on rough paper. Use a smoother, xerographic
paper. If this solves your problem, consult with the supplier of your letterhead to verify
that the paper used meets the specifications for this printer. See
Supported paper
weights and sizes.
The paper is excessively rough. Use a smoother, xerographic paper.
Overhead transparency defects
Overhead transparencies can display any of the image quality problems that any other type
of paper will cause, as well as defects specific to printing on transparencies. In addition,
because transparencies are pliable while in the print path, they are subject to being marked
by the paper-handling components.
NOTE
Allow transparencies to cool for at least 30 seconds before handling them.
In the printer driver Paper tab, select Transparency as the paper type. Also, make sure
that the tray is correctly configured for transparencies.
Check that the transparencies meet the specifications for this printer. See
Supported
paper weights and sizes. For more information on media specifications and ordering
information, consult the HP LaserJet Printer Family Print Media Specification Guide. For
the HP Color LaserJet 3550 series printer, go to http://www.hp.com/support/clj3550. For
the HP Color LaserJet 3700 series printer, go to http://www.hp.com/support/clj3700. For
downloadable manuals, select Manuals.
The transparencies you are using are not designed for proper toner adhesion. Use only
transparencies designed for HP Color LaserJet printers.
Handle transparencies by the edges. Oil from fingers can cause spots and smudges on
the transparencies.
Small, random, dark areas on the trailing edge of solid fill pages may be caused by
transparencies sticking together in the output bin. Try printing the job in smaller batches.
190 Chapter 8 Problemsolving ENWW
Vue de la page 201
1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 249 250

Commentaires sur ces manuels

Pas de commentaire