HP 3700 series Manuel d'utilisateur Page 79
- Page / 250
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Configuring trays
The HP Color LaserJet 3550 and 3700 series printer allows you to configure trays by type
and size. You can load different paper in the printer trays and then request paper by type or
size in the application or the printer driver.
NOTE
If you have used previous HP Color LaserJet printers, you might be accustomed to
configuring Tray 1 to first mode or cassette mode. To mimic the settings for first mode,
configure Tray 1 for ANY SIZE and ANY TYPE. The printer will pull paper from Tray 1 first (if
paper is loaded in that tray) when the print job does not specify another tray. This setting is
recommended if you use different types or sizes of paper in Tray 1. To mimic the settings
from cassette mode, set either the size or type for Tray 1 to a setting other than ANY SIZE
or ANY TYPE. This setting is recommended if you are using the same size and type of
paper in Tray 1.
NOTE
If you use 2-sided printing, be sure that the paper loaded meets the specifications for duplex
printing. (See
Supported paper weights and sizes.)
The instructions below are for configuring the trays at the printer control panel. You can also
configure the trays from your computer by accessing the embedded Web server. See
Using
the embedded Web server (HP Color LaserJet 3700 series printer only).
Configuring size
1. Press M
ENU
to enter the MENUS.
2. Press
to highlight Paper Handling.
3. Press
to select Paper Handling.
4. Press
to highlight TRAY 1 SIZE, TRAY 2 SIZE, or TRAY 3 SIZE.
5. Press
to select TRAY 1 SIZE, TRAY 2 SIZE, or TRAY 3 SIZE.
6. Press
or to highlight the desired paper size.
7. Press
to select the paper size.
8. Press M
ENU
to return to the Ready state.
9. If TRAY 1 SIZE is set to custom, the pop-up menu for Custom appears. See
Tray 1
custom paper for more information.
Configuring type
1. Press M
ENU
to enter the MENUS.
2. Press
to highlight Paper Handling.
3. Press
to select Paper Handling.
4. Press
to highlight TRAY 1 TYPE, TRAY 2 TYPE, or TRAY 3 TYPE.
5. Press
to select TRAY 1 TYPE, TRAY 2 TYPE, or TRAY 3 TYPE.
6. Press
or to highlight the desired paper type.
7. Press
to select the paper type.
8. Press M
ENU
to return to the Ready state.
ENWW Configuring trays 67
- HP Color LaserJet 1
- 3550 and 3700 1
- User Guide 3
- HP customer care 5
- Table of contents 7
- 3 I/O configuration 8
- 4 Printing tasks 8
- 5 Managing the printer 9
- 7 Maintenance 9
- 8 Problemsolving 10
- Glossary 12
- Printer basics 13
- User guide links 14
- Using the printer 15
- Printer configurations 16
- Printer features 19
- Features (continued) 20
- ENWW Printer features 9 21
- Walk around 22
- Back and side view 23
- ENWW Walk around 11 23
- Printer software 24
- Software for networks 26
- Utilities 27
- Print media specifications 29
- Control panel 31
- Control panel overview 32
- 1 message/prompt area 34
- 2 supplies gauge 34
- Control panel menus 35
- Menu hierarchy 36
- Configure device menu 37
- Diagnostics menu 38
- ENWW Menu hierarchy 27 39
- Information menu 40
- Paper handling menu 41
- ENWW Configure device menu 31 43
- Print quality menu 44
- ENWW Configure device menu 33 45
- System setup menu 46
- ENWW Configure device menu 35 47
- I/O menu 49
- Resets menu 49
- To set use requested tray 52
- PowerSave time 53
- Display brightness 54
- Auto continue 55
- Supplies low 56
- Jam recovery 57
- Language 57
- I/O configuration 59
- USB configuration 60
- 1 b-connector 61
- 2 parallel port 61
- HP Jetdirect print servers 62
- NetWare networks 63
- AppleTalk networks 63
- UNIX/Linux networks 63
- Network configuration 64
- Setting an IP address 66
- Setting the subnet mask 67
- Setting the default gateway 68
- Setting the syslog server 69
- Setting the idle timeout 70
- Setting the link speed 70
- To disable IPX/SPX 71
- To disable AppleTalk 72
- To disable DLC/LLC 72
- Printing tasks 73
- Controlling print jobs 74
- Priority for print settings 75
- Selecting paper 77
- Configuring trays 79
- Tray 1 custom paper 80
- Loading paper into Tray 1 81
- To load envelopes into Tray 1 84
- Printing envelopes 85
- Loading paper into Tray 2 86
- Loading paper into Tray 3 88
- Printing on special media 91
- Heavy paper 92
- HP LaserJet Tough paper 93
- Recycled paper 93
- 2-sided (duplex) printing 94
- Manual 2-sided printing 95
- Special printing situations 98
- Managing the printer 101
- Printer information pages 102
- Configuration page 103
- Supplies status page 103
- Information tab 107
- Settings tab 107
- Networking tab 108
- Other links 108
- Using the HP toolbox 109
- HP toolbox sections 110
- Status tab 110
- Troubleshooting tab 110
- Alerts tab 110
- Documentation tab 111
- HP toolbox links 112
- Using color 114
- Press ink sets 115
- Common ink standard in the 115
- Managing color 116
- Matching colors 118
- Maintenance 119
- Managing supplies 120
- Print cartridge storage 122
- HP print cartridges 122
- Non-HP print cartridges 122
- HP fraud hotline 123
- Replacing supplies and parts 124
- To change the print cartridge 125
- Replacing the transfer kit 127
- To replace the transfer unit 128
- To replace the fuser 131
- To replace the pickup roller 136
- To reset the fuser count 139
- Cleaning the printer 140
- Configuring e-mail alerts 141
- Problemsolving 143
- Control panel message types 145
- Control panel messages 146
- Paper jams 164
- To disable paper jam recovery 165
- Common causes of paper jams 166
- Clearing paper jams 168
- ENWW Clearing paper jams 157 169
- Jam in Tray 2 or Tray 3 170
- 4. Close the upper rear door 173
- ENWW Clearing paper jams 161 173
- Jam inside the fuser area 174
- ENWW Clearing paper jams 167 179
- Jam inside the front door 180
- Jam in the duplexer 182
- 4. Remove any jammed paper 183
- 6. Replace Tray 2 183
- ENWW Clearing paper jams 171 183
- Paper handling problems 184
- Paper path test page 190
- Registration page 191
- Event log 191
- Printer response problems 192
- Color printing problems 196
- Incorrect printer output 198
- Software application problems 201
- Print quality troubleshooting 202
- Calibrating the printer 204
- Supplies and accessories 205
- Service and support 211
- HP maintenance agreements 214
- Repacking the printer 215
- Printer specifications 217
- Regulatory information 221
- Material restrictions 223
- Extended warranty 223
- For more information 223
- Declaration of Conformities 225
- Safety statements 228
- Laser statement for Finland 229
- Working with memory and 231
- Enabling memory 236
- Checking DIMM installation 237
- LaserJet 3700 series printer 238
- 236 Index ENWW 248
- Q5990-90940 250
- *Q5990-90940* 250
Produits connexes et manuels pour Imprimantes laser/LED HP 3700 series
(34 pages)
(20 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.908 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels