Hp Netserver E Server series Manuel d'utilisateur télécharger pdf (Page 53)

Chapter 6 Installing an Additional Processor

CAUTION Always wear a wrist-strap and use a static-dissipating work

surface connected to the chassis when handling components.

Ensure the metal of the wrist strap contacts your skin.

9. Open the ZIF (Zero Insertion Force) lever to allow removal of the

terminator installed in the processor socket. See Figure 6-3.

You need to pull the lever out away from the ZIF socket and then raise it to

a full 90

to the system board.

ZIF

Lever

Processor Socket

Terminator

Figure 6-3. Removing the Terminator

NOTE Retain the terminator for future use. The NetServer will not

operate properly if using only one processor with no terminator

installed.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 105 106

Pas de commentaire

Hp Netserver E Server series Manuel d'utilisateur Page 53