Hp Netserver E Server series Manuel d'utilisateur télécharger pdf (Page 93)

Chapter 10 Troubleshooting

8. Insert the new battery with the positive sign (+) facing up into the socket.

9. Press down on the center of the battery with your thumb, pushing the

battery down into the socket.

The battery should snap into place.

10. Ensure the spring latch holds the battery firmly.

11. Replace the cooling duct/cover and the NetServer cover.

12. Power on the NetServer and reset the CMOS settings.

Problems Running the Setup Utility

If you cannot run the Setup Utility, the HP NetServer’s configuration in CMOS

memory may have become corrupt. The only way to recover from a corrupted

configuration is to clear it. Refer to "Clearing the CMOS Configuration," earlier in

this chapter.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 105 106

Pas de commentaire

Hp Netserver E Server series Manuel d'utilisateur Page 93