Hp Netserver E Server series Manuel d'utilisateur télécharger pdf (Page 67)

Chapter 8 Configuring the HP NetServer

DiagTools

This utility provides an easy-to-use hardware diagnostic for NetServer

verification, burn-in, and rapid troubleshooting. It must first be copied to diskettes

and then executed from the diskettes.

NOTE HP recommends using the HP DiagTools utility to verify all

NetServer functions are operating correctly, after completing

all the configuration topics. The HP DiagTools utility also

generates a text file containing the hardware detected and the

DiagTools test results. This text file, called a support ticket,

should be saved to a diskette and used for future reference,

especially by your support provider.

Setup (BIOS) Utility

The HP NetServer (BIOS) Setup Utility is used to configure the following

NetServer options:

• User Preferences

• Security

• Configuration

• Exit

Accessing the Setup Utility

The (BIOS) Setup Utility menu offers the choices listed above, and the

corresponding items are described in the topics below.

1. Turn on the monitor and the HP NetServer.

2. Start the Setup Utility by pressing the [F2] key, when the following

message appears on the boot screen.

Press <F2> to enter SETUP

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 105 106

Pas de commentaire

Hp Netserver E Server series Manuel d'utilisateur Page 67