Hp ProLiant ML310 G2 Server Manuel d'utilisateur télécharger pdf (Page 31)

Server Setup 31

The leveling jacks are extended to the floor. •

•

The full weight of the rack rests on the leveling jacks.

The stabilizing feet are attached to the rack if it is a single-rack

installation.

The racks are coupled together in multiple-rack installations.

Only one component is extended at a time. A rack may become

unstable if more than one component is extended for any

reason.

WARNING: To reduce the risk of personal injury or

equipment damage when unloading a rack:

At least two people are needed to safely unload the rack from

the pallet. An empty 42U rack can weigh as much as 115 kg

(253 lb), can stand more than 2.1 m (7 ft) tall, and may become

unstable when being moved on its casters.

•

• Never stand in front of the rack when it is rolling down the ramp

from the pallet. Always handle the rack from both sides.

WARNING: When installing a server in a telco rack, be

sure that the rack frame is adequately secured to the top and

bottom of the building structure.

WARNING: This server is very heavy. To reduce the risk

of personal injury or damage to the equipment:

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 123 124

Pas de commentaire

Hp ProLiant ML310 G2 Server Manuel d'utilisateur Page 31