Hp ProLiant ML310 G2 Server Manuel d'utilisateur télécharger pdf (Page 38)

38 HP ProLiant ML310 Generation 2 Server User Guide

Processor and Heatsink

CAUTION: Be sure that you have the current version of the

system ROM. Failure to flash the ROM with the correct version before

installing or replacing the processor causes system failure. For the most

current version of the ROM, go to the HP website

(http://www.hp.com/support

To remove the component:

1. Power down the server.

2. Remove the access panel ("Removing the Access Panel" on page 22

3. Disconnect the fan cable from the system board.

4. Loosen the four heatsink retaining screws.

CAUTION: Heatsink retaining screws should be removed in

diagonally opposite pairs (in an "X" pattern).

CAUTION: The pins on the processor socket are very fragile.

Any damage to them may require replacing the system board.

5. Remove the heatsink fan assembly

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 123 124

Pas de commentaire

Hp ProLiant ML310 G2 Server Manuel d'utilisateur Page 38