Hp ProLiant ML350e Gen8 Server Manuel d'utilisateur télécharger pdf (Page 104)

Hardware options installation 104

Install the TPM board. Press down on the connector to seat the board.

9. Install the TPM security rivet by pressing the rivet firmly into the system board.

10. If removed, install the PCI card in slot 6.

11. Install the PCI air baffle (on page 29), if removed.

12. Install the access panel (on page 26).

13. Do one of the following:

o For tower models, return the server to an upright position.

o For rack models, install the server onto the rails.

14. Connect each power cord to the server.

15. Connect each power cord to the power source.

16. Press the Power On/Standby button.

The server exits standby mode and applies full power to the system. The system power LED changes

from amber to green.

17. Do one of the following:

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 146 147

Pas de commentaire

Hp ProLiant ML350e Gen8 Server Manuel d'utilisateur Page 104