HP 24S Guide de l'utilisateur télécharger pdf (Page 17)

Network Address. The communication between the hub and the network management

station requires that the hub be assigned a network address. If you are using your hub in

a Novell NetWare network, it can be automatically configured with an IPX address from

an IPX router on the network. The hub is preconfigured to enable this function.

Alternatively, if you are using the hub in a network that uses the Internet Protocol (IP),

you manually configure the hub with an IP address using the hub console’s IP command.

See the IP command description in chapter 3, “Operation”, and appendix D, “Network

Addressing”, for more information on configuring a network-layer address on the hub.

When configured with an IP address, the hub can also send and respond to network-layer

test packets (ICMP Echo Request, or “Ping” packets).

Using Non-HP Network Management. To manage the HP EtherTwist Hub Plus and

Hub Plus/48 with a non-HP network management product, you must first obtain HP’s

Network Management Information Base (MIB) extensions. The HP MIB extensions are

available on request. Contact your HP-authorized LAN dealer or local HP sales office.

Introducing the HP EtherTwist Hub/12, Hub Plus, and Hub Plus/48 1-9

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 101 102

Pas de commentaire

HP 24S Guide de l'utilisateur Page 17