HP E5000 Guide de l'utilisateur télécharger pdf (Page 154)

SET EM NAME

Syntax

SET EM NAME "<EM name>"

Description

Sets the user defined string reported with SHOW EM STATUS. The system responds with confirmation

of the change. The default EM name is “EM-<mac address>” where <mac-address> is the

hardware Ethernet address for the iLO port on the EMU. For example, EM-78E7D1C12074.

Restrictions

<EM name> must be 1 to 32 characters long and includes all alphanumeric, underscore (_) , and

hyphen (-) characters.

SET ENCLOSURE ASSET

Syntax

SET ENCLOSURE ASSET [TAG] "<asset tag>"

Description

Sets the enclosure asset tag that is stored persistently in the EM, displayed with SHOW ENCLOSURE

INFO command.

Restrictions

<asset tag> must be 1 to 32 characters long and includes all alphanumeric, underscore (_)

and hyphen (-) characters.

Restrictions

<id> is a decimal integer from 0 to 99.

SET ENCLOSURE NAME

Syntax

SET ENCLOSURE NAME "<enclosure name>"

Description

Sets the persistent enclosure name stored in the EM. This name is displayed with SHOW ENCLOSURE

INFO command. The default (unset by user) value is ‘UnnamedEnclosure’.

Restrictions

<enclosure name> must be 1 to 32 characters long and includes all alphanumeric, underscore

(_), and hyphen (-) characters.

SET ENCLOSURE UID

Syntax

SET ENCLOSURE UID { ON | OFF | SLOW | FAST }

Description

Sets the blue enclosure UID. The enclosure has a UID on both the front and rear of the enclosure.

However, the front UID is only lit when enclosure power is on, while the rear UID is only lit when

154 Managing the EMU

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 198 199

Pas de commentaire

HP E5000 Guide de l'utilisateur Page 154