HP VMA-series Memory Arrays Manuel d'utilisateur télécharger pdf (Page 73)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 73

Configuring Target Ports

The second step in configuring a vSHARE HP VMA SAN Gateway is to configure

the target ports. The target ports control access to a particular LUN, which may be

useful for both security and bandwidth management.

In a vSHARE system, the VMA Arrays are the

targets and the host system (for

example, one or more database servers or application servers) are the

initiators. The

storage systems have storage target devices, LUNs, which the hosts access through

the HP VMA SAN Gateway.

vSHARE supports Fibre Channel target ports. Every target is a specific port on a

hardware Fibre Channel host bus adapter (HBA).

When using Fibre Channel, the target ports are automatically configured when you

create the storage container on the VMA Array.

A LUN may be exported through multiple target ports of different types. Active-

active multipathing is supported.

Configuring Fibre Channel Target Ports

When using Fibre Channel, the target ports are automatically configured when you

create the container on the VMA Array. However, you may wish to confirm that

the vSHARE system can see the target ports prior to creating the initiator groups.

The

show targets command enables you to view all Fibre Channel target ports.

show targets Command

The

show targets command lists all of the target ports and their addresses (wwn/

iqn), filtered by various options.

Syntax

show targets [node <cluster node id>] [hostname <hostname>]

[protocol fc] [id <target id>] [sessions] [detail]

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 277 278

Pasquale 21 Mar 2024 | 21:21:23

5 Lessons You Can Learn From Pornstar UK pornstar uk

Stanley 29 Mar 2024 | 00:42:15

7 Simple Secrets To Totally Moving Your Xxx Of Pornstar xxx of pornstar

HP VMA-series Memory Arrays Manuel d'utilisateur Page 73