HP 6500 Series Guide de l'utilisateur télécharger pdf (Page 112)

Solution 2: Wait while the ink dries

Solution: Wait at least thirty minutes for the ink inside the printer to dry, then try

the print job again.

Cause: The excess ink in the printer needed to dry out.

Poor black text

Try the following solutions if the text in your printouts is not sharp and the edges are

rough.

•

Solution 1: Wait before you attempt to reprint

•

Solution 2: Use TrueType or OpenType fonts

•

Solution 3: Align the printhead

•

Solution 4: Clean the printhead

Solution 1: Wait before you attempt to reprint

Solution: If the black cartridge is new, allow time for automatic servicing to clear

up the problem. Black print quality should start to improve in a few hours. If you do

not have time to wait, you can clean the printhead, but this uses more ink, and the

poor black text may reoccur until automatic servicing is allowed to complete.

Cause: Many black print quality problems clear up when the automatic services

are performed.

Solution 2: Use TrueType or OpenType fonts

Solution: Use TrueType or OpenType fonts to ensure that the printer is able to

print smooth fonts. When selecting a font, look for the TrueType or OpenType icon.

TrueType icon

OpenType icon

Cause: The font was a custom size.

Some software applications offer custom fonts that have jagged edges when

enlarged or printed. Also, if you want to print bitmapped text, it might have jagged

edges when enlarged or printed.

If this did not solve the issue, try the next solution.

Solution 3: Align the printhead

Solution: Align the printhead.

Chapter 8

108 Solve a problem

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 249 250

Pas de commentaire

HP 6500 Series Guide de l'utilisateur Page 112